|Home||» Products||» Sandwitch Waterproofing System||» Waterproofing Chemical|
We offer the finest grade Waterproofing Chemical, which is applied on the concrete based surface of terrace so as to resist moisture, rain water, and other allied contents. It is well formulated by adept professionals, and composed of grade-A compounds that guarantee its environment friendly nature, effectiveness, precise pH value, great stability, and great shelf life. Last but not least, the offered Waterproofing Chemical is simple to apply, non-toxic, non hazardous and comes in several secured packaging choices for patrons to select from.
HAWKSHIELD-SWS layered waterproofing coating membrane: Blend of Portland cement, fine treated silica sand and active chemicals, when mixed with water & applied as a coating layer. HAWKSHIELD SWS : Initial application is penetrative coating with HAWKSHIELD-PNC. 1ST primer coat on penetrative application with a thin coat of HAWKSHILED-WCM.2ND coat with HAWKSHILED WCM normal coat. 3rd coat is with HAWKSHIELD-BLACK. 4th coat is again with HAWKSHIELD WCM normal coat. 5t" & 6th final coat is with HAWKSHIELD-ROOF white colour helps to reduce Room Temperature up to 3-4o besides getting guaranteed waterproofing effects HAWKSHIELD- ROOF white colour helps to reduce Room Temperature up to 3-4o besides getting guaranteed waterproofing effects
SURFACE PREPARATION : Fill the cracks, if any, with HAWKSEAL-SUPER/ HAWKSEAL- KS. Clean the surface with wire brush. Remove all loose particles, old bituminous coating etc. Wash the surface well with clean water. Take 10 lit of clean water in to a bucket. Slowly add 500 ml of HAWKSHIELD-PNC Penetrative coating while stirring the solution with a stick. Apply the same on the treated surface with a painting brush. Please make sure that, mixed solution must be penetrated in to the hairline cracks. Leave the treated surface for minimum 24 hrs. Wipe out the entire surface with slightly wet cloth. Now the surface is ready for coating.
HOW TO APPLY : 1" primer base coat: Mix 2 kg, of HAWKSHIELD-WCM powder with 3 lit of water in to brush able solution and apply the same as primer coat on the. treated surface.
2"coat : Mix 5 1/2 kg of HAWKSHIELD-WCM Powder with 3 lit of water in to brush able solution and apply over the base coat.
4" coat: Repeat the same as in 2nd coat with HAWKSHIELD-WCM over the 3rd coat. We are also recommending for laying GEO CLOTH for extra protection. 5th& 6th coat: Apply HAWKSHIELD-ROOF Directly on the 4th & 5th coat respectively.
There must be a minimum interval of -6 hrs. between each coat.
AREAS OF APPLICATION : Roofs- Flat & Slopping, Parapets, Sunshades, Walls, Deck, Podium, water tank, Basements, Marine flooring, Industrial flooring, Pharmaceuticals, Cold Storage, Hospital etc. (except- Roofs, Parapet & sunshade walls, no need to apply HAWKSHIELD-ROOF). Apply 2 more coats of
HAWSHILED - WCM normal coat over the 4t" & 5t coat.
SHELF LIFE : 2 Yrs.